default

-30%

xDeep Stealth 2.0 Rec Wing Only

0 0
Benefits of buying from DiveStock
Add to Wishlist

Availability: In Stock

Special Price: €230.30

Regular Price: €329.00

Did you find the same product with a cheaper price? Let us know!

Quick Overview

Stealth 2.0 Rec Side Mount BC Only

STEALTH 2.0 REC SIDEMOUNT FOR SPORTS DIVERS

The flexibility and safety that sidemount diving gives to sport and recreational divers is why it’s grown in popularity. Building on the proven advanced design and materials technology used in the STEALTH 2.0 Tec and Classic family, the STEALTH 2.0 Rec is our expert solution for demanding recreational and sport divers. The STEALTH 2.0 system delivered in an easily useable and friendly form.

Freedom for Wrecks and Reefs

Being free of a rigid tank or bcd allows great freedom of movement in the water. The STEALTH 2.0’s streamlined recreational wing and harness combination provide the key to enjoying a balanced and relaxed approach to your sport dives.


Extend your fun time

Carrying twin cylinders is the safest and in sidemount, the most balanced and streamlined way of diving. The STEALTH 2.0 ensures that cylinders are kept tight and secure to the body, eliminating movement. The perfect balance provided ensures minimal drag in the water, reducing effort, improving gas consumption and enhancing underwater time and enjoyment.


Easy Access for Buoyancy Control

The STEALTH 2.0 was the first system to have a central dump valve for buoyancy control. Proven in cave and technical diving the advantages are just as important for sports diving. The valve is easy to reach with either hand, and simple to dump excess gas without having to change your position in the water. Having great control over buoyancy means safer and more relaxing dives.




Flexible Configuration
It is possible to set your inflator on the left or right side of the wing, meaning you can feed either cylinder and choose which hand you prefer for inflation control. It’s easy to tailor your set-up for drysuit or warm water board-short diving.

 


 

 

Tough and hardwearing
Unlike cave divers you may not be squeezing through small passages, but your system will still get wear on the back from boat dives, shore entries and even just being transported. At risk areas are protected with tough and long lasting materials that preserve the integrity of your equipment.

 

 

TECHNOLOGY
Advanced materials technology utilised in innovative design has been the key to XDEEP’S success. Using only the very best materials sourced from Germany and USA and designed and built in Europe, we will never compromise on quality.


 

CORDURA®Ÿ 1100 dTEX

CORDURA® is a widely known brand of polyamide fabrics of the highest resistance resulting from special weave structure and weaving method. The outer side of CORDURA® fabric is coated with Teflon aperture, which ensures very high resistance to abrasion. The inner side of the CORDURAŸ fabric we use is coated with a layer of polyurethane. 

The XDEEP dive gear are only made of CORDURA®Ÿ fabric produced in Germany in compliance with the highest quality standards of INVISTA company. 

CORDURA® is a registered trademark of INVISTA company for resistant textile fabrics. More information on CORDURA® fabric can be found on www.cordura.com Teflon® is a registered trademark of E. I. du Pont de Nemours and Company. To get more information on Teflon® product, visit website www.teflon.com.

 


 

Anti-bacterial coating

The moisture inside the BCD or a buoy creates perfect conditions for the development of different types of microorganisms, including fungi and pathogenic bacteria. 

By removing water from the BCD after the dive, like it or not you form some aerosol which is filled with numerous bacteria. And from there it is very easy for them to get to your lungs and sinus. 

Many divers have already experienced how bothersome it is, when chronic problems with upper airways deprived them of diving for many long months. 

In order to reduce the risk, the inner shell in all XDEEP buoyancy compensators and SMBs contains special agent preventing the development of bacteria and fungi. The agent, safe for people, permanently adheres to the shell, so it does not rinse off and protects your dive gear during the entire period of use.

 


 

TPU 0.215mm coating

To provide water tightness of the bladder in each wing the bladder material is coated with a special outer shell made of thermo-weldable polyurethane, during the production. It enables welding the bladder consisting of two parts and filling it with air. 

Its parameters and quality translates directly into your safety and durability of the BCD. We can say with no exaggeration that it is one of the most essential parts of each wing and diving buoy. 

In general, in wings and jackets shells of thickness from 0.08 mm to 0.2 mm are applied. In xDEEP buoyancy compensators we use materials coated with as much as 0.215 mm-thick TPU shell. The shells of higher thickness are more resistant to any damage that thinner shells. Consequently, it provides better safety of use.

 


 

"K" type inflator

K-type inflator used as a standard type of inflators in all our buoyancy compensators is a balanced piston type inflator, which enables precise adding of the gas to the buoyancy compensator. 

The body of the inflator is made of POM-H poliacetal of very high mechanical durability and 100% resistance to salt water.The seat of the valve is made of metal and therefore the inflator is definitely more resistant to freezing than other inflators made completely of plastic. All metal parts of the inflator are made of top quality alloys resistant to salt water. 

The inflator is equipped with the most popular type of medium pressure hose connection so there are no problems with its incompatibility with the first stage hose. The material retains very high mechanical resistance and flexibility both in low winter temperatures and in tropical heat.

 


 

Ultrasonic welding

Welding of some elements in the dive gear, such as reinforcement of valve seats, requires precise heating-up of the joint without heating-up the entire element. The said requirement is satisfied only by the state-of-the-art welding method, i.e. ultrasonic welding. 

It involves introducing sound waves of over 20KHz frequency to the fabrics to be joined together using sonotrode (picture nearby). At the junction of two fabrics the mechanical energy is converted into heat and pressure, which results in welding the fabrics. The heat is generated point-wise only at the junction of the fabrics to be joint together, which as a result makes it possible to avoid harmful heating of the entire fabric. 

The elements of our SMBs and diving BCDs are welded with the use of specialized numerically controlled welding machine and instrumentation specially constructed for the said purpose. 

The process guarantees very precise control of energy transferred to the fabric providing solid and repeatable welds.


 

HF welding

Welding is one of the stages in the production of BCDs and diving buoys. In XDEEP we attach a lot of significance to the quality of the said process since durability and weld resistance exert great impact on your safety. 

From among several different welding technologies, we have selected HF welding because of very high repeatability of parameters, homogeneity of welds and fully automatic process. 

The fabric is inserted between two electrodes and then the computer begins to control the welding process. The electrodes are connected to the source of high-frequency electric power, and a special controller strictly regulates the power and time of welding to obtain the top-quality weld. 

Thanks to such advanced technology and top-quality of fabrics used for production, XDEEP scuba gear is provided with lifetime guarantee on all welds.

 


 

Fabric laser cutting

The bladders in all xDEEP wings are cut with the use of specialized laser for cutting fabric. 

The computer-controlled machine equipped with high power laser cuts the shape of the bladder with an accuracy of one tenth of a millimetre with all necessary openings. The edge of the material at the cut is immediately protected against fraying during longer use.

 



Amann Serabond thread

Serabond® is the top quality technical thread of Performance techX type, made of continuous polyester fibres and produced in Germany by Amann & Söhne GmbH & Co. KG, the leading company on the market of more than 150 years of tradition. 

Serabond thread used as a standard thread in XDEEP diving gear was specially designed for long years of operation in extreme marine conditions and is highly resistant to all types of factors which occur during diving at sea, including the impact of salt water, UV radiation and variable temperatures. 

Thanks to such reliable thread you can be sure that XDEEP diving gear will last for many years, regardless of the types of dives you are going to use it for. 

Serabond is a trademark of Amann & Söhne GmbH & Co. KG. More information on Serabond thread can be found on the producer’s website: http://www.amann.com

 



Triple, fully trimmed seams

Apparently, the seams which are of little importance, in the diving gear can cause a lot of trouble. We enormously care about the quality of the XDEEP diving gear. 

The XDEEP wings are provided with a triple seam, trimmed from inside, which protects the BCD against fraying of the material edges. Such solution increases the costs of the production but guarantees that the final product will be very resistant and durable.

 

Weekly Special No
Product's code BC-S2R-0
Manufacturer xDeep
Product Type BCD's, Wings