default

More Views

  • xDeep ZEOS 28/38 Comfort Full Set BC System
  • xDeep ZEOS 28/38 Comfort Full Set BC System
  • xDeep ZEOS 28/38 Comfort Full Set BC System
  • xDeep ZEOS 28/38 Comfort Full Set BC System
  • xDeep ZEOS 28/38 Comfort Full Set BC System
  • xDeep ZEOS 28/38 Comfort Full Set BC System
  • xDeep ZEOS 28/38 Comfort Full Set BC System
  • xDeep ZEOS 28/38 Comfort Full Set BC System
  • xDeep ZEOS 28/38 Comfort Full Set BC System
  • xDeep ZEOS 28/38 Comfort Full Set BC System
  • xDeep ZEOS 28/38 Comfort Full Set BC System

xDeep ZEOS 28/38 Comfort Full Set BC System

0 0
Benefits of buying from DiveStock
Add to Wishlist

Quick Overview

ZEOS 28/38 Comfort Full Set

  • Zeos 28 or 38 BC
  • TECal harness with 3D Mesh shoulder straps' pads and backplate pad
  • Single tank adapter
  • LP infaltor's hose
  • Can bands - 2 pcs

"Please contact us for further details"

* Required Fields

€509.00

xDeep ZEOS 28/38 Comfort Full Set BC System

ZEOS 28/38 Comfort full set :

  • Zeos 28 or 38 BC
  • TECal harness with 3D Mesh shoulder straps' pads and backplate pad
  • Single tank adapter
  • LP infaltor's hose
  • Can bands - 2 pcs

 

Obsessive about Quality

Knowing “we can do better” is our obsession at XDEEP. Innovative designs that focus on performance. The ZEOS epitomises technical excellence using the best materials. European Design and manufacture driven by diving passion.

 


 

A TRULY MODERN CLASSIC

Classical form and function have been elevated to a new level. Innovative design combines ruggedness and reliability to meet the needs of all divers, whether in beautiful blue waters, stunning emerald seas or the crystal frozen arctic oceans.

 

Take your Diving to the Next Level

Through technical design, constant testing and evolution the ZEOS is balanced to help achieve a flat and expert trim. The centre of gravity of the gas in the cylinder and the centre of buoyancy of the ZEOS are perfectly matched.

As a result your stability will be significantly better. You will enjoy improved gas consumption, enhanced buoyancy and finning will be easier. No more sea horse position forced by traditional BCD’s.

 

No Compromises above or below the Waves

At the start and end of each dive the ZEOS holds you high out of the water. The design ensures most of the wing stays underwater, using more of the buoyancy. This provides extra lift keeping your head and shoulders clear of the waves. Wait in comfort for your pick-up. Underwater you can eliminate trade-offs and experience perfect trim made simple and easy by the exact geometry of the ZEOS.

 


 

Constant Comfort through Innovation

Maximise the feeling of freedom expert divers enjoy by diving a buoyancy system that is at one with you. Our 3D Mesh tailors itself to your body-shape through a unique microfiber structure that ensures perfect stability. The 3D Mesh helps eliminate movement of your equipment during the dive.

Our 3D mesh has no change in buoyancy characteristics, whatever the depth, so you can reduce the extra weight less thoughtful designs demand.

                


 

ZEOS, THE BESPOKE SOLUTION

Custom configured to suit you, to suit your diving, to suit the conditions you dive in and to suit your individual preferences. The ZEOS full set comes ready to dive - add a cylinder, a regulator, a diver and immerse in water!

 

Choose between Two Versatile, Stylish and Rugged Double Shell Wings with Differing Lift

The ZEOS 28 with 13Kg of lift provides females and adventurers with a smaller build or height with a great solution. The 28 is also suitable for warm water Ali tank diving.

The ZEOS 38 has additional streamlined and balanced lift, providing 17Kg of upward thrust to divers looking for that extra reserve, but who still demand a neat and tidy configuration.

 

 


 

Choose between beautifully engineered steel or aluminium backplates

The ZEOS steel backplate eliminates the need for lead at the waist and enhances your balance and trim, especially in cold water conditions where extra weight is best distributed across your body.

The ZEOS aluminium backplate works well in warm water diving where the additional weight is not needed or if you travel often to explore the wonders the world offers.

 


 

Easily Customised Harness

The fully adjustable harness is equipped with tough ITW Nexus buckles made of polyacetal, a material impervious to salt water and extreme temperatures. Able to be quickly and easily configured to just about any body shape, there is no better way of getting the perfect fit.

 


 

PUT YOUR WEIGHTS WHERE YOU REALLY NEED THEM

A modular system of weight pockets allows you to customise your weight distribution for any conditions. Easily manage the extra demand for lead needed in cold water diving.

                           

 

  • Droppable weight pockets 
    Large size 2x6 kg

  • Droppable weight pockets 
    Medium size 2x3 kg

  • Trim pockets 
    M-size 2 kg each

 


 

 

Weight Management made Easy

The whole pocket is simply and quickly removed when you want to pass your weights up to the boat. Two part pockets are user friendly, even in thick gloves. Weights fit into separate slots and are very secure in the pocket. They won’t fall out accidentally.

 


 

Secure until You want to Drop Them

Accidental loss of weights and a resultant rapid ascent is a serious issue. XDEEP weight pockets utilise robust ITW Nexus buckles that slide into place with a reassuring click, a sound which tells you your weight is securely fastened for the dive.

If you need to drop your weights the size and construction of the buckle make it quick and easy.

 


 

Protection for You and the Environment

Lead is useful for divers as for a small size it has a large mass. Lead has some disadvantages. In air, lead oxide forms on the surface of the block. Lead oxide is a carcenogenic compound that can accumulate in our bodies. It will also pollute the air around you, especially in enclosed spaces like cars and boat cabins. It’s advisable to keep weights covered.

XDEEP pockets provide effective protection once the weight is installed.

 


 

Attention to Detail

The weight pocket has been designed with a rigid edge to keep it open, facilitating adding in the weight at the surface or underwater. Our obssesive nature and focus on the small details adds up to the improved performance of our XDEEP systems.

TECHNOLOGY FOR ADVENTURE

The ZEOS is the result of wanting to improve on the best single tank wings in the world. We are proud to have developed a lightweight, tough and perfectly engineered wing, manufactured in Europe from the best materials sourced in Germany and the USA. Enjoy your diving adventures backed by our passion.

 


 

CORDURA®? 1100 dTEX

CORDURA® is a widely known brand of polyamide fabrics of the highest resistance resulting from special weave structure and weaving method. The outer side of CORDURA® fabric is coated with Teflon aperture, which ensures very high resistance to abrasion. The inner side of the CORDURA? fabric we use is coated with a layer of polyurethane. 

The XDEEP dive gear are only made of CORDURA®? fabric produced in Germany in compliance with the highest quality standards of INVISTA company. 

CORDURA® is a registered trademark of INVISTA company for resistant textile fabrics. More information on CORDURA® fabric can be found on www.cordura.com Teflon® is a registered trademark of E. I. du Pont de Nemours and Company.

 


 

Anti-Bacterial Coating

The moisture inside the BCD or a buoy creates perfect conditions for the development of different types of microorganisms, including fungi and pathogenic bacteria. 

By removing water from the BCD after the dive, like it or not you form some aerosol which is filled with numerous bacteria. And from there it is very easy for them to get to your lungs and sinus. 

Many divers have already experienced how bothersome it is, when chronic problems with upper airways deprived them of diving for many long months. 

In order to reduce the risk, the inner shell in all XDEEP buoyancy compensators and SMBs contains special agent preventing the development of bacteria and fungi. The agent, safe for people, permanently adheres to the shell, so it does not rinse off and protects your dive gear during the entire period of use.

 


 

TPU 0.215mm Coating

To provide water tightness of the bladder in each wing the bladder material is coated with a special outer shell made of thermo-weldable polyurethane, during the production. It enables welding the bladder consisting of two parts and filling it with air. 

Its parameters and quality translates directly into your safety and durability of the BCD. We can say with no exaggeration that it is one of the most essential parts of each wing and diving buoy. 

In general, in wings and jackets shells of thickness from 0.08 mm to 0.2 mm are applied. In xDEEP buoyancy compensators we use materials coated with as much as 0.215 mm-thick TPU shell. The shells of higher thickness are more resistant to any damage that thinner shells. Consequently, it provides better safety of use.

 


 

"K" type Inflator

K-type inflator used as a standard type of inflators in all our buoyancy compensators is a balanced piston type inflator, which enables precise adding of the gas to the buoyancy compensator. 

The body of the inflator is made of POM-H poliacetal of very high mechanical durability and 100% resistance to salt water.The seat of the valve is made of metal and therefore the inflator is definitely more resistant to freezing than other inflators made completely of plastic. All metal parts of the inflator are made of top quality alloys resistant to salt water. 

The inflator is equipped with the most popular type of medium pressure hose connection so there are no problems with its incompatibility with the first stage hose. The material retains very high mechanical resistance and flexibility both in low winter temperatures and in tropical heat.

 


 

Ultrasonic Welding

Welding of some elements in the dive gear, such as reinforcement of valve seats, requires precise heating-up of the joint without heating-up the entire element. The said requirement is satisfied only by the state-of-the-art welding method, i.e. ultrasonic welding. 

It involves introducing sound waves of over 20KHz frequency to the fabrics to be joined together using sonotrode (picture nearby). At the junction of two fabrics the mechanical energy is converted into heat and pressure, which results in welding the fabrics. The heat is generated point-wise only at the junction of the fabrics to be joint together, which as a result makes it possible to avoid harmful heating of the entire fabric. 

The elements of our SMBs and diving BCDs are welded with the use of specialized numerically controlled welding machine and instrumentation specially constructed for the said purpose. 

The process guarantees very precise control of energy transferred to the fabric providing solid and repeatable welds.


 

HF Welding

Welding is one of the stages in the production of BCDs and diving buoys. In XDEEP we attach a lot of significance to the quality of the said process since durability and weld resistance exert great impact on your safety. 

From among several different welding technologies, we have selected HF welding because of very high repeatability of parameters, homogeneity of welds and fully automatic process. 

The fabric is inserted between two electrodes and then the computer begins to control the welding process. The electrodes are connected to the source of high-frequency electric power, and a special controller strictly regulates the power and time of welding to obtain the top-quality weld. 

Thanks to such advanced technology and top-quality of fabrics used for production, XDEEP scuba gear is provided with lifetime guarantee on all welds.

 


 

Fabric Laser Cutting

The bladders in all xDEEP wings are cut with the use of specialized laser for cutting fabric. 

The computer-controlled machine equipped with high power laser cuts the shape of the bladder with an accuracy of one tenth of a millimetre with all necessary openings. The edge of the material at the cut is immediately protected against fraying during longer use.

 


 

Amann Serabond Thread

Serabond® is the top quality technical thread of Performance techX type, made of continuous polyester fibres and produced in Germany by Amann & Söhne GmbH & Co. KG, the leading company on the market of more than 150 years of tradition. 

Serabond thread used as a standard thread in XDEEP diving gear was specially designed for long years of operation in extreme marine conditions and is highly resistant to all types of factors which occur during diving at sea, including the impact of salt water, UV radiation and variable temperatures. 

Thanks to such reliable thread you can be sure that XDEEP diving gear will last for many years, regardless of the types of dives you are going to use it for. 

Serabond is a trademark of Amann & Söhne GmbH & Co. KG.

 


 

Triple, Fully Trimmed Seams

Apparently, the seams which are of little importance, in the diving gear can cause a lot of trouble. We enormously care about the quality of the XDEEP diving gear. 

The XDEEP wings are provided with a triple seam, trimmed from inside, which protects the BCD against fraying of the material edges. Such solution increases the costs of the production but guarantees that the final product will be very resistant and durable.

 


 

CNC EDGE BEVELLING

The diving gear is rather expensive so it should be constructed so as to last for many years. The diving equipment parts include backplates and single tank adapters made of metal which sharp edges could cause wear through the outer shell of BCD or dry suit.

In XDEEP backplates and adapters all edges are additionally processed which involves cutting the edges at 45 degree angle using a special computer-controlled machine. The special robot precisely grinds all the edges with an accuracy of one hundredth of a millimetre.

Weekly Special No
Product's code ST-Z28-C1-CP
Manufacturer xDeep
Gender Unisex
Product Type BCD's